« Men Cheat Why ?A bizarre Jurassic maniraptoran with elongate ribbon-like feathers 胡氏耀龙 »

PClass-CPT Program introduction

Tthe PClass-CPT program© reads and displays the results of Cone Penetration Tests (CPT). The results are used in estimating soil types and properties at each depth increment, and classify the soil accordingly.

The Soil Classification method used in this program is based on the Probabilistic and Fuzzy Soil Classification from Cone Penetration Test developed by Dr. Zhongji Zhang and Dr. Mehmet T. Tumay

   Reference

  • “The Nontraditional Approaches in Soil Classification Derived from the Cone Penetration Test” ASCE Special Publication No. 121, Probabilistic Site Characterization at the National Geotechnical Experimentation sites, February 2003, pp. 101. Zhang, Z. & Tumay, M.T.
  • "Statistical to Fuzzy Approach Toward CPT Soil Classification" ASCE Journal of Geotechnical & Geoenvironmental Engineering, Vol. 125, No. 3, March 1999, pp. 179-186, Zhang, Z. & Tumay, M.T.
  • Closure to "Statistical to Fuzzy Approach Toward CPT Soil Classification," ASCE Journal of the Geotechnical and Geoenvironmental Engineering, Vol. 126, No 6, June 2000, pp. 579-580. Zhang, Z. & Tumay, M.T.
  • "Simplification of Soil Classification Charts Derived from Cone Penetration Test," Geotechnical Testing Journal, American Society of Testing and Materials, Vol. 19, No. 2, June 1996, pp. 203-216. Zhang, Z. & Tumay, M.T.
  • "Use of Uncertainty Methodology in Identification and Classification of Soils Based upon CPT," Ph.D. Dissertation, Department of Civil and Environmental Engineering, Louisiana State University, Baton Rouge, Louisiana, 1994, Zhang, Z.
  • Sample CPT Test Data 

  • Units: SI units

  • Depth    Tip    Sleeve
    (m)    (MN/m2)    (MN/m2)

    0    0.009576    0
    0.02    0.0904932    0.000558281
    0.04    0.17935848    0.00110124
    0.06    0.253764    0.001551312
    0.08    0.34119288    0.001979359
    0.1    0.42986664    0.002365272
    0.1259151    0.515193109    0.002857478
    0.1493368    0.52634867    0.003808854
    0.2095095    0.540569509    0.010457978
    0.2327883    0.600632767    0.013307882
    0.2560671    0.660695928    0.013309816
    0.2793459    0.720759282    0.017109018
    0.3026724    0.720881567    0.018060279
    0.3259513    0.780944921    0.020910173
    ......

     

  • Sample plot cone date

  • 1 2  This program should not be adopted, modified, or copied without a prior written consent. It is not permitted to transmit the software or the related ......So, i'm sorry to provide download of this program. Source:http://www.ltrc.lsu.edu/

Leave a Reply

Personal

Hi all, I'm a Geotechnical Engineer (Class 1 RSE, Senior engineer of Civil 2007 before) that aims to develop economical solutions to technical problems. Also link between scientific discoveries and the commercial applications that meet societal and consumer needs.
Thanks for following Twitter Facebook Mybloglog

Feel free to Contact me E-Mail please.


Comments
Messages
Previous
Categories